Magic Bullet Stopped Working? How To Fix

Last Updated on May 26, 2022 by

The Magic Bullet is a strong and portable bullet blender that is affordable. Things go wrong, just like any other kitchen item. Do you ever have the experience of attempting to mix anything, and the Magic Bullet refuses to start? It may not be very pleasant when your Magic Bullet blender stops operating. There are a variety of causes for this, and the answer is usually straightforward.

A defective power cord may cause your Magic Bullet not to work. Your power cable may be faulty if your Magic Bullet is plugged in but not turning on. Examine the cord for any rips or exposed wires. 

Magic Bullet Stopped Working: How to Fix

There might be many reasons why your Magic Bullet isn’t functioning. I’ll go through some frequent Magic Bullet difficulties, whether there’s no power to the blender, the blades aren’t rotating, or it simply won’t mix your stuff.

Check For Power At The Outlet

Try plugging in anything else, such as a touch or another appliance, to see if it works. If not, the problem might be with that particular outlet rather than your Magic Bullet. You may also test a different power outlet in your house to ensure the issue isn’t originating from where you usually use it.

Examine The Power Cord For Any Damage.

If none of your outlets are working, your power cable may be broken. You’ll need to acquire a new cable for this. If possible, look for fraying or any other surface damage that might have caused the insulation to wear away.

Check the ends of the wires where they enter the Magic Bullet and the wall socket. Broken cables will cause your Magic Bullet to malfunction! Consider buying a new power cable. Before you go out and purchase one at random, be sure it’ll work with your blender.

Defective Activators

Small white activators on the Magic Bullet’s power base signal the motor to begin mixing. If one of these fails, the blender will not be able to start blending. You may change your activators or send your Magic Bullet in for repairs if you have a problem with them. The activators may need cleaning. 

Burned Motor

We already know that the motor moves the blender’s blades. The blades will be unable to move if the engine fails. In Magic Bullet, this is occasionally the case. Excessive usage might have caused the engine to burn out. A new motor is required. To avoid this occurring again, operate the blender at regular intervals to allow the engine to cool down.


Leakage is a significant problem. It may happen if the amount of material within the Magic Bullet is too much. Pouring all of the ingredients simultaneously to save time isn’t good. This will not only make your blender ineffective, but it will also cause harm to your blender. If your blender has cracks, you may have leakage.

The fissures might have developed over time or due to something else, such as the blender dropping. Your lid’s broken rubber might cause it.

Check For Debris In The Power Cord Port Or The Blender Base

If you’ve followed all of the above methods and your Magic Bullet still doesn’t have power, something may have been stuck within the port where the power wire goes.

If this occurs, disconnect everything and unscrew both sections of your base unit so you can use tweezers or similar tiny instruments to remove anything lodged inside. Keep track of which screws go where for future reassembly.

Food Particles Have Clogged The Blade

If food fragments are trapped within the blade, it will not spin correctly. Remove the blade attachment and run the blender without anything inside for a few seconds to see whether this is the problem.

This might be the problem if you see a difference after doing so. I’ve found that using a toothpick to loosen any material lodged around the blades itself is the best method to solve this issue. Whether feasible, switchblades to determine if the problem still exists.

Magic Bullet has Power, but the Blades Won’t Spin

Magic Bullet Blade Not Spinning

There are several things you can check if your Magic Bullet has power, but the blades are not spinning. This problem usually means that a component is worn out or broken and will need to be repaired.

The Magic Bullet Is Overloaded

The blades will not be able to spin if your Magic Bullet blender is too full. To get the best results, make sure you only blend the recommended amount of ingredients.

Your Blades Are Stuck Or Blocked

Something can become caught between the blade unit and the motor base, preventing the Blade from spinning correctly. If this happens, use a tool like tweezers or pliers to remove whatever is stuck in there before turning it back on.

The Blade Unit’s Gear Could Be Broken

If one of these gears fails, things will most likely start catching when they aren’t supposed to because parts that should move no longer do so. This usually indicates that a new blade assembly is required. This is a common issue with the Magic Bullet, but it’s not difficult to fix.

The Base’s Gear May Be Broken

The gears in your base unit will probably need to be replaced if they’re broken. This will typically create problems when you attempt to mix since the blade will no longer move as it should. You may get new gear sets for the Magic Bullet blender from their website if this occurs.

The Bearing May Be Broken Or Stripped.

Bearings enable smooth movement and less friction, allowing your blender blades to spin freely without catching. When these bearings fail, anything may get stuck between them and generate friction, which might cause difficulties. Even after wear-and-tear has taken its toll on these bearing parts, replacing them typically cures the problem.

Damaged Or Broken Blades

Your Magic Bullet blades will need to be changed if damaged or broken. This normally does not result in noise, but it does imply that when you attempt to mix anything, the blades do not move as they should. These blade units may be replaced by purchasing them directly from Magic Bullet or through a third-party seller.

My Magic Bullet Will Not Blend Ingredients

Ingredients Won’t Combine In The Magic Bullet

If you have power to your Magic Bullet and the blades are spinning when you switch it on, there are a few things to look at if it doesn’t combine ingredients.

The Magic Bullet Is Overloaded

If the Blade is whirling, but the Magic Bullet isn’t mixing the ingredients you’ve added, there’s probably too much at the bottom of the cup. All components must be pulverized and mixed in the blending cup.

The Container Cup Doesn’t Have Enough Liquid

The Blade rotates sometimes, but there isn’t enough liquid in the container cup to mix all you put in it. If necessary, add additional water or other liquids until the components flow freely and are well combined when blended for a prolonged period.

Food Caught In The Blades

The meal may become lodged between the blades, preventing them from properly blending the food. If this occurs, you’ll need to use tweezers to remove whatever is installed in there before attempting to mix again.

The Blade Has Lost Its Luster

Even when there is enough liquid in the container, it might be challenging to mix items correctly if your Blade is old and dull. The most convenient method to repair a broken or worn-out blade unit is to buy one straight from Magic Bullet, although they are also available elsewhere online.

How To Maintain Your Magic Bullet

All Magic Bullet parts are dishwasher safe except for the electrical base, although they must be put on the top rack to avoid damage. If you’re making many beverages or meals at once, rinse the Magic Bullet blade under hot water between each recipe. This prevents tastes from transferring from one recipe to the next. If you don’t have a dishwasher, hand-wash the components in warm water and dishwashing solutions.

Do not use your dishwasher’s sanitize cycle to clean Magic Bullet cups. This cycle is offered on certain dishwashers and sanitizes dishes using hot water temperatures. The plastic Magic Bullet cups may melt due to the intense heat. Never immerse the Magic Bullet’s electrical base in water. This may cause the equipment to malfunction.

Conclusion On The Magic Bullet Not Working

Don’t panic if your Magic Bullet isn’t functioning. There are many causes for this, and we’ve produced a list of easy remedies that you should be able to do in about 15 minutes.

If none of these suggestions work for you while using your Magic Bullet blender, double-check your handbook since each model may change differently depending on how old it is. You’ll usually discover troubleshooting instructions particular to that model, which might help you determine why yours isn’t functioning. If your blender isn’t blending smoothly, consider one of these simple fixes before discarding it.