Last Updated on May 17, 2022 by
Imagine having a great craving for your favorite smoothie or other beverage when you get up in the morning. When you turn on your NutriBullet, it either refuses to start, or it starts, blitzes for a few seconds, and then stops. You’ll be disappointed, and you’ll be anxious about what’s wrong with your beloved NutriBullet.
If your NutriBullet isn’t working, it might be due to exposed wiring, the NutriBullet being disconnected accidentally, or a combination of these factors. If the blades aren’t cutting, they may be dull, you may have overfilled the NutriBullet cup, or the blades are clogged with food particles.
Reasons Why Your NutriBullet Stopped Working
1. Blender Problems
It can be annoying when your blender breaks down while blending your favorite smoothie. While you are not to blame, there are a few factors to consider. First, your blender may be worn out, and specific components have stopped working.
The cables may also be exposed, posing a safety risk. If your NutriBullet stops operating in the middle of the process, turn it off or disconnect it from the main switch.
You may also wish to dislocate the NutriBullet’s case to inspect the inside components for any exposed parts. Please do not put your NutriBullet in the dishwasher to preserve its components. Dishwasher-safe components include lids, cups, and lip rings, except for the motor base.
You may also see whether your NutriBullet is inserted in the wrong way. You may be surprised to learn that the blender just required minor repairs.
2. Blade Issues
a) The Blades May Only Partially Cut Food
Thankfully, this is also a straightforward repair. The motor will often function normally, but the final products will be partly cut. This might be caused by old blades that have gotten dull. As previously said, this is a simple repair, so don’t be concerned. You may always replace the old blades with new ones for better cutting.
b) The Blades Will Not Cut
So, what if the blades won’t turn? Let’s look at some of the reasons behind this in more detail.
i) You Stuff It With Too Much Food
A suggested fill line is typically included on electronic gadgets like blenders and electric kettles. Going beyond that will result in a jam, and the blades will stop cutting.
ii) You Put the Wrong Foods
Adding hard foods like nuts and ice to your NutriBullet might cause the device to stop working. The blades of your normal NutriBullet may struggle to cut through the hard food unless you get a NutriBullet Pro intended for grinding entire nuts or another high-powered NutriBullet.
When making your smoothie, choose soft items like fresh fruits and vegetables and add enough liquids to let it mix smoothly.
ii) The Blades Are Clogged
To avoid the collection of food particles, clean the blades now and then. Most crucial, thoroughly clean the edges to solve the issue permanently.
iv) The Blade Motor Doesn’t Function
The motor usually drives the NutriBullet’s blades. As a result, if the blender’s motor suddenly stops operating, it might be because you ran it longer. To save the engine from burning out, it is advised that the mixing be done in intervals.
3. Leakage Problems
Leakages in your NutriBullet are usually a negative indication. Your NutriBullet may leak for the following reasons:
a) NutriBullet overstuffing
Okay, we understand. You’re short on time and want to simultaneously combine all of your components. While this may seem self-evident, you’re putting your NutriBullet at risk. You’ll also be putting strain on the blades.
b) NutriBullet Cracks
Whatever the location of the cracks, they’ll always find a way to spill out your components. You need to repair the shattered components, not the complete NutriBullet.
c) Damage To The Extractor Blade Seal
Underneath the extractor blade is a stretchy gasket seal. The extractor blade will struggle to connect to the cup once the seal weakens. As a consequence, your NutriBullet will begin to leak.
How Do You Unclog A NutriBullet?
You’re stuck with a clogged NutriBullet and don’t know what to do. Jamming usually happens when the latch and the container jar become caught together. To repair it yourself, check for the plastic activators in your NutriBullet, which should be three. The levers are white.
If you push on each activator, they may go down, so give it a shot. They may or may not budge right now. Combine vinegar, oil (cooking oil would suffice), and hot water if this is the case. Allow the plastic activators to soak in the fluid for a few minutes after gently moistening them.
After that, you should be able to push the activators quickly, and they should release. If not, repeat the procedure. If you’re still experiencing issues after a second attempt, you should contact NutriBullet customer service. You may need new activators.
If My Nutribullet Stops Working, Can I Return It To The Store Where I Bought It?
If your NutriBullet stops operating, you may take it back to the retailer where you bought it for repair or replacement if it’s still under warranty. If you recently purchased the NutriBullet and it is not functioning, you may return it to the shop where you purchased it for a replacement.
Can The NutriBullet Overheat?
A NutriBullet can overheat. These are devices that feature a motor and, as a result, may overheat if they are used in a way or for a length of time that differs from what the manufacturer recommends. A NutriBullet features an inbuilt temperature regulation that will turn the machine off if it becomes too hot. This will turn off the motor, allowing you to disconnect your device and let it cool down.
A NutriBullet, although being designed to mix almost anything, may overheat if misused. You may encounter a motor that overheats if you blend anything frozen or difficult to mix, if you blend something that is exceptionally thick and may stress the engine, or if you use it for a more extended amount of time than the manufacturer recommends.
The NutriBullet has a temperature control built in that monitors the motor’s temperature while operating. If the motor grows hotter than it should, it will shut off, giving you enough time to disconnect it and let it cool down before using it again.
What’s The Deal With My NutriBullet Blinking?
The power light on the NutriBullet indicates if the appliance is working properly. You could notice the power light flicker at you if the blender pieces are misaligned, and it’s not safe to operate your NutriBullet. The power light may also turn on if you use the incorrect lid for mixing.
Flickering power light indicates an issue, so don’t ignore it. Stop what you’re doing, double-check that you have the correct cups and everything is in place, and then wait for the light to go out. If it still doesn’t work, you may contact NutriBullet support for assistance.
Is The NutriBullet Resistant To Heat?
The NutriBullet is not heat resistant, so don’t use it to mix hot foods. It may not operate correctly with warm or hot liquids while being built to handle liquids. The NutriBullet’s engine isn’t as powerful as other commercial blenders’, and it might overheat if used to mix anything too hot.
The NutriBullet is a high-powered blender for making smoothies, juices, and other dishes. However, you need to take certain care to prevent damaging the appliance. If the engine is driven for more than 60 seconds, it may overheat. It would help if you never put the machine in the dishwasher since it might be damaged.
To keep the engine cool, you need to take a few measures. Blenders may overheat if used for an extended period or if the motor is not maintained cool. To avoid this, run your blender for 20 to 40 seconds before pausing it for 60 seconds. This will prevent the engine from overheating and help your blender last longer.
How Can The Nutribullet’s Performance Be Improved?
The greatest thing you can do is opt for a NutriBullet with the maximum wattage available. Keep in mind that the original NutriBullet was only powered by 600 watts. Anything above that should suffice. The NutriBullet is available in various variants, including the original, the NutriBullet Pro, the NutriBullet Pro 1000, and the NutriBullet Pro+, which has a 1200 watt engine.
Making sure your blades are sharp is one approach to improving the performance of your blender. The blades of used blenders may get dull after being left for lengthy periods. When the blades strike the food, they may provide a lot of resistance to the motor, which might harm it in the long term.
Ensure that your blades are razor-sharp. You may be able to locate alternatives on the NutriBullet website if they aren’t. If you don’t want to spend money on additional blades, you may sharpen the blade on your NutriBullet. You must use extreme caution.
Conclusion
The NutriBullet is an excellent blender with a long service life if used correctly. However, it is not without flaws. The blades may get dull or cease functioning. Your blender may break down while blending food, or the rubber seals may wear out over time. If none of these solutions above solve your Nutribullet issues, or if you need more help, it’s time to contact customer care by email or phone.
Unless otherwise stated, repairing or replacing components should be free of charge if your blender is still under warranty (and hasn’t surpassed its regular 1-year lifetime). The Nutribullet is simple to use but not necessarily so straightforward to repair. It would help if you now had all of the information you need to diagnose and fix any future problems with your blender.
